FDM PET SDS.pdf

Safety data sheet

Product: Ultrafuse® PET natürlich
Version: 2.1
Date / Revised: 15.12.2022
ID No: 11120970/SDS_GEN_00/EN
Date of print: 09.01.2023

1. Identification

Product identifier
Ultrafuse® PET natürlich
Recommended use: 3D Printing

Details of the supplier of the safety data sheet
Company: BASF 3D Printing Solutions B.V.
Eerste Bokslootweg 17
7821 AT Emmen, Netherlands

Telephone: + 31 591 820 389
E-mail address: sales@basf-3dps.com

Emergency telephone number

International emergency number:
Telephone: +49 180 2273-112

2. Hazards Identification

Classification of the substance or mixture

According to UN GHS criteria
No need for classification according to GHS criteria for this product.

Label elements

Globally Harmonized System (GHS)
The product does not require a hazard warning label in accordance with GHS criteria.

Other hazards

According to UN GHS criteria
The product may cause burns, if handled in the melted state.

3. Composition/Information on Ingredients

Substances

Not applicable

Mixtures

Chemical nature
Polymer

Hazardous ingredients (GHS)
No particular hazards known.

4. First-Aid Measures

Description of first aid measures

• If inhaled:
  Remove the affected individual into fresh air and keep the person calm. If symptoms persist, seek medical advice.
• On skin contact:
  Wash thoroughly with soap and water. If irritation develops, seek medical attention. Burns caused by molten material require hospital treatment.
• On contact with eyes:
  Rinse immediately for at least 15 minutes with plenty of water. If irritation develops, seek medical attention.
• On ingestion:
  Rinse mouth immediately with water. Immediate medical attention required.

Most important symptoms and effects, both acute and delayed

• Symptoms: (Further) symptoms and/or effects are not known so far
• Hazards: No hazard is expected under intended use and appropriate handling.

Indication of any immediate medical attention and special treatment needed

Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.

5. Fire-Fighting Measures

Extinguishing media

Suitable extinguishing media: water spray, foam, dry powder, carbon dioxide

Special hazards arising from the substance or mixture

Carbon oxides.

Advice for fire-fighters

Special protective equipment: Wear a self-contained breathing apparatus.

Further information: Dust can form an explosive mixture with air. Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

6. Accidental Release Measures

Avoid dispersal of dust in the air. Avoid the formation and build-up of dust - danger of dust explosion. Handle to minimize dusting and eliminate open flame and other sources of ignition.

Personal precautions, protective equipment and emergency procedures

No special precautions necessary.

Environmental precautions

Do not discharge into drains/surface waters/groundwater.

Methods and material for containment and cleaning up

• For small amounts: Sweep/shovel up.
• For large amounts: Sweep/shovel up. Dispose of absorbed material in accordance with regulations. Avoid raising dust.

7. Handling and Storage

Precautions for safe handling

Avoid inhalation of dusts/mists/vapours. Ensure adequate ventilation. Provide suitable exhaust ventilation at the drying process and in the area surrounding the melt outlet of processing machines. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges. Avoid the formation and deposition of dust.

Conditions for safe storage, including any incompatibilities

Suitable materials: Low density polyethylene (LDPE), High density polyethylene (HDPE), Polypropylene (PP), Polystyrene (PS)
Further information on storage conditions: Avoid deposition of dust. Avoid extreme heat. Protect against moisture.

8. Exposure Controls/Personal Protection

Control parameters

• Components with occupational exposure limits
  • 25038-59-9: Polyethyleneterephthalate (PET)

Exposure controls

Personal protective equipment

• Respiratory protection: Breathing protection if breathable aerosols/dust are formed.
• Hand protection: Use additional heat protection gloves when handling hot molten masses.
• Eye protection: Safety glasses with side-shields.
• Body protection: Body protection must be chosen depending on activity and possible exposure.

General safety and hygiene measures: Wear protective clothing to prevent contact; wash hands and face before breaks and at the end of the shift.

9. Physical and Chemical Properties

Information on basic physical and chemical properties

10. Stability and Reactivity

Reactivity

No hazardous reactions if stored and handled as prescribed/indicated.

Chemical stability

The product is stable if stored and handled as prescribed/indicated.

Conditions to avoid

Temperature: > 300 °C.

11. Toxicological Information

Information on toxicological effects

Acute toxicity: Virtually nontoxic after a single ingestion. Virtually nontoxic by inhalation. Virtually nontoxic after a single skin contact.

Assessment of irritating effects

Not irritating to eyes and skin. May cause mechanical irritation.

12. Ecological Information

Toxicity

Assessment of aquatic toxicity: High probability that the product is not acutely harmful to aquatic organisms.

Persistence and degradability

Experience shows this product to be inert and non-degradable.

Bioaccumulative potential

No accumulation in organisms is expected.

13. Disposal Considerations

Must be disposed of or incinerated in accordance with local regulations.

14. Transport Information

Not classified as a dangerous good under transport regulations

15. Regulatory Information

Safety, health and environmental regulations/legislation specific for the substance or mixture.

16. Other Information

Any other intended applications should be discussed with the manufacturer. The data contained in this safety data sheet are based on current knowledge and experience.