Material Datasheet
Product Texts
PA 1101 is a whitish polyamide 11 powder, which is optimised for the use as a laser sintering material. PA 1101 is made out of renewable raw materials (castor oil). The material is characterised by elasticity and high impact resistance.
Properties
• high elongation at break
• elasticity
• high impact resistance
• excellent resistance to chemicals, especially hydrocarbons, aldehydes, ketones, mineral bases and salts, alcohols, fuels, detergents, oils and fats
Acceptance criteria
• cytotoxicity according to DIN EN ISO 10993-5
Typical applications
• mechanically loaded functional prototypes and series parts with long-term moving elements (e.g. hinges)
• in the automotive industry, it is mainly used for interior components for crash relevant parts (PA 1101 components do not splinter)
• especially suited for small to medium sized parts, thin walls and lattice structures
Mechanical properties
| Mechanical properties | Value | Unit | Test Standard |
|---|---|---|---|
| Shore D hardness | 75 | - | ISO 7619-1 |
| Tensile Modulus | ISO 527 | ||
| X Direction | 1600 | MPa | |
| Y Direction | 1600 | MPa | |
| Z Direction | 1600 | MPa | |
| Tensile Strength | ISO 527 | ||
| X Direction | 48 | MPa | |
| Y Direction | 48 | MPa | |
| Z Direction | 48 | MPa | |
| Strain at break | ISO 527 | ||
| X Direction | 45 | % | |
| Y Direction | 45 | % | |
| Z Direction | 30 | % | |
| Charpy impact strength | ISO 179/1eU | ||
| +23℃，X Direction | N | kJ/m2 | |
| +23℃，Y Direction | N | kJ/m2 | |
| Charpy notched impact strength | ISO 179/1eA | ||
| +23℃，X Direction | 7.8 | kJ/m2 | |
| +23℃，Y Direction | 7.8 | kJ/m2 | |
| +23℃，Z Direction | 6.5 | kJ/m2 |
PA 1101 PA11
| Temp. of deflection under load | ISO 75-1/-2 | ||
|---|---|---|---|
| 1.80MPa,X Direction | 46 | °C | |
| 1.80MPa,Y Direction | 46 | °C | |
| 1.80MPa,Z Direction | 47 | °C | |
| 0.45MPa,X Direction | 180 | °C | |
| 0.45MPa,Y Direction | 180 | °C | |
| 0.45MPa,Z Direction | 181 | °C |
| Thermal properties | Value | Unit | Test Standard |
|---|---|---|---|
| Melting temperature(20℃/min) | 201 | ℃ | ISO 11357-1/-3 |
| Temp.of deflection under load | ISO 75-1/-2 | ||
| 1.80MPa | 46 | ℃ | |
| 0.45MPa | 180 | ℃ |
| Other properties | Value | Unit | Test Standard |
|---|---|---|---|
| Density (lasersintered) | 990 | kg/m3 | EOS Method |
| Powder colour(ac. to safety data sheet) | White | - | - |
Characteristics
Processing
3D Printing, Additive Manufacturing, Laser Sintering, Rapid Prototyping
Delivery form
Powder
Special Characteristics
High impact or impact modified
Homopolymer
Features
Chemical Resistance
General Chemical Resistance, Solvent Resistance, Grease Resistance, Oil Resistance
Certifications
Contains renewable resources
Applications
Automotive, Sports Equipment
Last change: 2018-11-22 Source: www.materialdatacenter.com Page: 2/2
The data correspond to our knowledge and experience at the time of publication. They do not on their own represent a sufficient basis for any part design, neither do they provide any agreement about or guarantee the specific properties of a product or part or the suitability of a product or part for a specific application. It is the responsibility of the producer or customer of a part to check its properties as well as its suitability for a particular purpose. This also applies regarding the consideration of possible intellectual property rights as well as laws and regulations. The data are subject to change without notice as part of EOS' continuous development and improvement processes.